InteliDrive DCU Marine - 3.0.0 Global Guide
162
Setpoint group Act. Calls/SMS Related FW 3.0.0
Range [units] [DISABLED, DATA, SMS, E-MAIL, EML-SMS ]
Default value DISABLED
Step [-]
Comm object 9594 Related applications All
Config level Standard
Setpoint visibility Always
Description
Up to three separate channels are available for any one of the following types of messages:
DISABLED Channel is disabled.
DATA Analog, GSM or ISDN modem connection.
SMS
Channel sends SMS message. Use this option only when GSM modem or
InternetBridge-NT is connected.
E-MAIL Channel sends e-mail. Only when InternetBridge-NT is connected.
EML-SMS
Channel sends short e-mail with SMS like content. Only when InternetBridge-NT is
connected.
Email contains:
header with serial number and application info.
Alarm list
20 History records (reason, date, time)
Example: of EML-SMS
AL=(Sd Water Temp,Wrn Water Temp,!Emerg Stop,ActCallCH1Fail)
Note: Both SMS and E-MAIL active call types are supported in conjunction with InternetBridge-NT, if
cellular interface is used (WAN connection mode = Cellular). E-MAIL only is supported, if Ethernet
interface is used (WAN connection mode = Ethernet).
Note: To receive DATA active call run InteliMonitor – Type of connection = Active call. InteliMonitor
Active call window contains list of received AID files. Each list item contains Engine name, Date, Time,
ID serial number.
AcallCH1-Type
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
