InteliDrive DCU Marine - 3.0.0 Global Guide
138
Setpoint group Engine protect Related FW 3.0.0
Range [units] 0 .. 60 [s]
Default value 10
Step 1
Comm object 10133 Related applications All
Config level Standard
Setpoint visibility Always
Description
Binary input protection is activated when input is closed for longer time than BinInp delay 3. To use this filter,
binary input protection Delay must be configured in DriveConfig to BinInp delay 3.
Note:
BinInp delay x is active only for Binary inputs configured as protection and it is related to protection only.
BinInp delay x does not affect optional logical function of an input.
BinInp Delay 3
6 back to List of setpoints
To Next Page
Loading...
