InteliDrive DCU Marine - 3.0.0 Global Guide
32
They can be used mostly for some values that have not state (e.g. RPM or other that are not measured on
Analog input). This way can be configured protection to any ID-DCU MARINE internal value or more levels
external indication.
Example of Universal state1 configuration to Engine speed (Warning for Engine speed > 1600RPM, 1s):
This configuration is available in DriveConfig – Expert mode.
3.2 ID-RPU
Image 3.1 Redundancy protection unit
Note: Maximal torque to tight main screw is 0.25 Nm.
To Next Page
Loading...
