InteliDrive DCU Marine - 3.0.0 Global Guide
176
Related FW 3.0.0 Related applications All
Comm object 149
Description
If the input is closed
Panel buttons Start, Stop are inactive
No setpoints can be adjusted from controller front panel
Controller mode (e.g. OFF-AUX) cannot be changed
Fault reset (screen sensitive), Horn reset buttons are still active
It is possible to list Values, Setpoints and History
Binary inputs function is without change
Active Access lock is indicated by “L” in the upper right corner of controller screen.
Note: Access Lock does not protect Setpoints change, Mode change and START, STOP commands
from InteliMonitor (direct or modem). To avoid unqualified changes of the selected setpoints or
commands use password protection.
Access Lock
6 back to List of LBI
To Next Page
Loading...
