InteliDrive DCU Marine - 3.0.0 Global Guide
135
Setpoint group Engine protect Related FW 3.0.0
Range [units] 0 .. 60 [s]
Default value 20
Step 1
Comm object 10024 Related applications All
Config level Standard
Setpoint visibility Always
Description
This parameter adjusts delay after engine start when alarms configured as RunOnlyBlkDel2 (i.e. "running
only", group #2) are started to be evaluated. The "running only" alarms are not beeing evaluated while the
engine is not running or then, after start, while the adjusted delay is running.
For details see drawing, which is part of RunOnlyBlkDel3 (page 136) description.
RunOnlyBlkDel2
6 back to List of setpoints
To Next Page
Loading...
