ComAp InteliDrive DCU Marine - Protection Types; Values

InteliDrive DCU Marine - 3.0.0 Global Guide
262
Warning Indication only (no engine stop)
Shutdown Fast engine stop
Cooldown Engine stop with cooling period
Fail sensor Measured value is out of sensor characteristics.
Warning+BW Indication + Broken wire detection
Shutdown+BW Shut down + Broken wire detection
Warning + Fls Warning is activated in the case of sensor fail as well
Shutdown + Fls Shut down is activated in the case of sensor fail as well
Sd override This protection stays active in the case of Sd override is activated.
Alarm only Only Alarm list indication, disappear without confirmation
HistRecOnly History record only
Protection types
8.1.6 Values