ComAp InteliDrive DCU Marine - Ain Cu 3 - 6

InteliDrive DCU Marine - 3.0.0 Global Guide
271
Value group Analog CU Related FW 3.0.0
Resolution [units] 1 [-]
Comm object 9157 Related applications All
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 3" is just default value which can be changed in analog input Property: Name.
AIN CU 3
6 back to List of values
Value group Analog CU Related FW 3.0.0
Resolution [units] 1 [-]
Comm object 9158 Related applications All
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 4" is just default value which can be changed in analog input Property: Name.
AIN CU 4
6 back to List of values
Value group Analog CU Related FW 3.0.0
Resolution [units] 1 [-]
Comm object 9159 Related applications All
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 5" is just default value which can be changed in analog input Property: Name.
AIN CU 5
6 back to List of values
Value group Analog CU Related FW 3.0.0
Resolution [units] 1 [-]
Comm object 9160 Related applications All
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 6" is just default value which can be changed in analog input Property: Name.
AIN CU 6
6 back to List of values