ComAp InteliDrive DCU Marine - Analog CU; Battery Volt; CPU Temp; D+;Oil Press;Ain CU 2

InteliDrive DCU Marine - 3.0.0 Global Guide
270
Analog CU
Value group Analog CU Related FW 3.0.0
Resolution [units] 1 [V]
Comm object 8213 Related applications All
Description
Internal Voltage measured on controller board.
Battery Volt
6 back to List of values
Value group Analog CU Related FW 3.0.0
Resolution [units] 1 [°C]
Comm object 10124 Related applications All
Description
Internal Temperature measured on controller board.
CPU Temp
6 back to List of values
Value group Analog CU Related FW 3.0.0
Resolution [units] 1 [V]
Comm object 10603 Related applications All
Description
Engine alternator output voltage detected at D+ controller terminal.
D+
6 back to List of values
Value group Analog CU Related FW 3.0.0
Resolution [units] 1 [Bar]
Comm object 9155 Related applications All
Description
Oil Press
6 back to List of values
Value group Analog CU Related FW 3.0.0
Resolution [units] 1 [-]
Comm object 9156 Related applications All
Description
Analog input value corresponding to analog input located directly on ID-DCU controller.
Note: The name "Ain CU 2" is just default value which can be changed in analog input Property: Name.
AIN CU 2
6 back to List of values