InteliDrive DCU Marine - 3.0.0 Global Guide
24
3 Application overview
3.1 ID-DCU MARINE functions
3.1.1 Default archives
The ID-DCU MARINE controller can be configured for auxiliary, emergency, combined (constant speed
engines) or propulsion mode engines. The configuration can be changed in the DriveConfig software by
selecting appropriate archive file.
Application Archive file Available modes Engine start / stop
AUX Auxiliary
DCU-MARINE-
AUX-3.0.0.aid
OFF - AUX
BI Blackout Start
BI Remote Start
BI Remote Stop
BI Rem Start/Stop
ID-DCU MARINE Start / Stop
button
EME Emergency
DCU-MARINE-
EME-3.0.0.aid
OFF - EME
(Standby)
BI Blackout Start
BI Remote Start
BI Remote Stop
BI Rem Start/Stop
ID-DCU MARINE Start / Stop
button
CMB Combined
DCU-MARINE-
CMB-3.0.0.aid
OFF - EME - HRB
(Standby-“Manual)
EME, HRB:
BI Blackout Start
BI Remote Start
BI Remote Stop
BI Rem Start/Stop
ID-DCU MARINE Start / Stop
button
PRP Propulsion
DCU-MARINE-
PRP-3.0.0.aid
OFF - PRP
BI RemRepStart
BI Remote Start
BI Remote Stop
BI Rem Start/Stop
ID-DCU MARINE Start / Stop
button
3.1.2 Function description details
Protection Fls can be used with electronic modules and ID-RPU module only. Protection is activate only if there
is failure of receiving data and value is in logical 0.