ComAp InteliDrive DCU Marine - Load Sharing; Load Gain; Load Int; RQSP Aver

InteliDrive DCU Marine - 3.0.0 Global Guide
149
Load sharing
Setpoint group Load sharing Related FW 3.0.0
Range [units] 0,0 .. 200,0 [%]
Default value 5,0
Step 0,1
Comm object 8659 Related applications PRP
Config level Standard
Setpoint visibility Always
Description
Relative Gain of the load sharing loop.
Load Gain
6 back to List of setpoints
Setpoint group Load sharing Related FW 3.0.0
Range [units] 0,0 .. 100,0 [%]
Default value 10,0
Step 0,1
Comm object 8713 Related applications PRP
Config level Standard
Setpoint visibility Always
Description
Relative Integration factor of the load sharing loop.
Load Int
6 back to List of setpoints
Setpoint group Load sharing Related FW 3.0.0
Range [units] 0 .. 1000 [%]
Default value 5
Step 1
Comm object 10136 Related applications PRP
Config level Standard
Setpoint visibility Always
Description
Average value calculated from all Speed Request values of controllers running in Loadsharing mode together
(on the same CAN2 bus). See Load sharing block diagram (page 151).
RQSP Aver
6 back to List of setpoints