ComAp InteliDrive DCU Marine - PLC Message 14 - 16; Emergency Stop; Engine RPM; Overload

InteliDrive DCU Marine - 3.0.0 Global Guide
230
Related FW 3.0.0 Related applications All
Comm object 535
Description
The output is closed while the alarm generated by the PLC block Force Prot is present in the alarm list.
PLC Message 14
6 back to List of LBO
Related FW 3.0.0 Related applications All
Comm object 792
Description
The output is closed while the alarm generated by the PLC block Force Prot is present in the alarm list.
PLC Message 15
6 back to List of LBO
Related FW 3.0.0 Related applications All
Comm object 793
Description
The output is closed while the alarm generated by the PLC block Force Prot is present in the alarm list.
PLC Message 16
6 back to List of LBO
Related FW 3.0.0 Related applications All
Comm object 260
Description
Indication of Emergency Stop input.
Emergency Stop
6 back to List of LBO
Related FW 3.0.0 Related applications All
Comm object
Description
Engine speed state indication. Output is closed when no RPM is received from J1939 (sensor fail) or
Overspeed or Under speed is detected.
Engine RPM
6 back to List of LBO
Related FW 3.0.0 Related applications All
Comm object
Description
Active overload protection activation.
Overload
6 back to List of LBO