InteliDrive DCU Marine - 3.0.0 Global Guide
5
1 Document information
1.1 Clarification of notation 5
1.2 About this guide 5
1.3 Legal notice 6
1.1 Clarification of notation
Note: This type of paragraph calls readers attention to a notice or related theme.
IMPORTANT: This type of paragraph highlights a procedure, adjustment etc., which can cause a
damage or improper function of the equipment if not performed correctly and may not be clear at
first sight.
Example: This type of paragraph contains information that is used to illustrate how a specific function
works.
1.2 About this guide
InteliDrive DCU Marine is a specialized engine controller for Marine applications. It controls, monitors and
protects the engine in single (Auxiliary) or variable (propulsion) speed operational modes. The controller can
communicate with Engine Management System via the CAN serial line using standard J1939 or another
(KWP2000) communication protocol.
InteliDrive controllers are equipped with a powerful graphic display with icons, symbols and bar-graphs for
intuitive operation, which together with high functionality sets new standards in engine controls.
Engine functions
Engine sequencing and control (start/stop, warm-up and cool-down, pre-lubrication etc.)
Engine monitoring and protections (2 or more level analog inputs protection, adjustable delays)
Speed measurement from magnetic pick-up or from ECU
Running hours meter, number of starts counter
Configurable 14 Binary inputs and Outputs and 8 Analog inputs
Setpoints are adjustable via InteliDrive panel or via PC software
3 level password protection
On screen Alarm and ECU Alarm indication
Event and time driven engine history for back tracing
Two or more languages selectable in controller
Communication
RS232 / Modbus RTU
Analog or GSM modem
Internet
To Next Page
Loading...
Need help?
General
