InteliDrive DCU Marine - 3.0.0 Global Guide
4
4.4.3 Inteli IO8/8 (can be switched to IO16/0) 70
4.4.4 IS-BIN 16/8 71
4.4.5 Inteli AIO9/1 71
4.4.6 IS-AIN8 72
4.4.7 IS-AIN8TC 73
4.4.8 IGS-PTM 74
4.4.9 InternetBridge-NT 75
4.4.10 I-CB Communication bridge 76
4.4.11 I-AOUT8 76
5 Controller setup 79
5.1 PLC - programmable functions 79
5.1.1 General specification 79
5.1.2 List of available PLC functions 80
5.1.3 PLC configuration example 83
5.2 Shared IO and Virtual IO 90
5.2.1 Virtual Binary Outputs (VBOUT) module 90
5.2.2 Shared virtual inputs and outputs 90
5.2.3 Distributed binary inputs and outputs 92
5.3 Multiple ECU modules support 93
5.3.1 Multi ECU Configuration with DriveConfig 93
6 Communication 96
6.1 InteliDrive - Engine ECU communication 96
6.1.1 Example of standard J1939 engine 96
6.1.2 Tier 4 Final 96
7 Technical data 100
7.1 ID-DCU MARINE 100
7.2 CAN bus interface 102
8 Appendix 104
8.1 Controller objects 105
8.1.1 List of controller objects types 105
8.1.2 Setpoints 105
8.1.3 Binary Inputs 174
8.1.4 Binary outputs 196
8.1.5 Analog Inputs 242
8.1.6 Values 262