© 06/2006 8154-001
3/4
TCD 2015
Cylinder head
W 01-04-04
6
z Clean sealing surfaces.
z Fit a new cylinder head gasket.
The sealing surfaces for the cylinder head
gasket must be clean and free of oil.
Label OBEN / TOP facing the cylinder
head.
© 45812_1
z Fit cylinder head.
z Oil the cylinder head screws slightly.
z Fasten screws.
Attention!
Screws can be reused a maximum 3 times
with written documentation.
© 34976-2
z Tighten screws alternately with rotation angle disc
and socket wrench insert.
A01 001
© 40582-0
To Next Page
Loading...
