© 06/2006 8222-001
1/4
TCD 2015
Fuel system
W 07-09-01
6
Removing and installing temperature transmitter
Commercial available tools – W 06-07-03 . . . . . . . . . . . . (B-bank)
Attention!
Pay attention to utmost cleanliness when
working on the fuel system.
Remove residue paint and particles of dirt
before removing.
Clean the respective affected parts care-
fully. Blow damp areas dry with compres-
sed air.
Observe the safety regulations and natio-
nal specifications for handling fuels.
Close all connections immediately after
opening with new, clean plugs/caps.
Do not remove plugs/caps until immedia-
tely before assembling.
Collect leaking operating substances in
suitable vessels and dispose of according
to regulations.
Read out error memory of the motor con-
trol timer with SERDIA.
Removing temperaure transmitter
z Remove charge air pipe (B-bank).
W 06-07-03
© 40822-0
To Next Page
Loading...
