5
Job card overview
TCD 2015
© 06/2006 8146-001
15/22
00 General
Job card Activity and additional job cards necessary for its execution
W 00-02-06
Checking the compression pressure
W 01-01-01 W 07-07-01
W 00-05-01
Mounting engine on assembly block and demounting
W 13-02-03
01 Cylinder head
Job card Activity and additional job cards necessary for its execution
W 01-01-01
Setting valve clearance
W 04-06-03
W 01-02-02
Removing and installing the rocker arm and rocker arm bracket
W 01-01-01 W 04-06-03
W 07-03-01
(A-bank)
W 07-03-01
(B-bank)
W 01-02-06
Disassembling, assembling and checking the rocker arm and rocker arm bracket
W 01-02-02
W 01-04-04
Removing and installing the cylinder head
W 01-02-02 W 01-04-09
W 06-01-05
(A-bank)
W 06-01-05
(B-bank)
W 06-07-03
(A-bank)
W 06-07-03
(B-bank)
W 07-07-01
I 01-04-08
Grinding the cylinder head sealing surface
W 01-05-01
W 01-04-09
Checking piston overhang
W 01-04-04 W 04-06-03
W 01-05-01
Removing and installing the valves
W 01-04-04
W 01-05-04
Checking the valves
W 01-05-01
W 01-06-03
Checking the valve guide
W 01-05-01
I 01-06-04
Renewing valve guide (oversize, pressed version)
W 01-05-01 W 01-06-03
W 01-07-08
Checking the valve lag
W 01-04-04
I 01-07-09
Replacing valve seat insert (oversize)
W 01-05-01 W 01-07-08
To Next Page
Loading...
