© 06/2006 8157-001
1/2
TCD 2015
Cylinder head
W 01-05-04
6
Checking the valves
Commercial available tools:
– Micrometer gauge
– Slide gauge
– W 01-05-01
Clean valves before testing.
When the wear limit is reached, the valve
must be renewed.
Checking valve stem diameter
z Remove valves.
W 01-05-01
z Measure valve stem diameter with micrometer
gauge.
P01 31
P01 32
© 42182-1
Checking valve edge thickness
z Measure valve edge thickness with slide gauge.
P01 35
P01 36
© 42183-1
To Next Page
Loading...
