TCD 2015
Crankcase
I 03-10-05
© 06/2006 8182-001
6/8
6
z Turn the grinding/surface plate (1) forwards and
backwards evenly (approx. 180°).
z Clean the collar rest.
z Remove grind paste and grinding particles.
Lift the grinding/surface plate slightly
several times for the grinding paste to
spread evenly.
Note soft grinding noise.
Repeat the surface process to check.
1
© 39906-0
z Clean inside of the crankcase.
z Remove cover plates (1).
z Check the inside of the crankcase for cleanliness.
The tool set must be cleaned and the grin-
ding/surface plate oiled slightly for corro-
sion protection.
1
© 39914-0
Assembly
z Insert new O-rings (1).
z Coat the O-rings with fitting compound.
1
© 39917-0
To Next Page
Loading...
