© 06/2006 8165-001
1/6
TCD 2015
Drive system
W 02-02-02
6
Renewing the crankshaft sealing ring
(flywheel side)
Commercial available tools:
– Depth-measuring
appliance
– Pricker. . . . . . . . . . . . . . . . . . . . . . . 8198
– Assembly lever . . . . . . . . . . . . . . . . 9017
Special tools:
– Assembly tool . . . . . . . . . . . . . . . 142650
– Self-tapping screw
– Washer
– W 12-06-01
Removing the crankshaft sealing ring
z Remove flywheel.
W 12-06-01
z Loosen crankshaft sealing ring in its seat evenly with
a mandrel.
z Make a hole in the crankshaft sealing ring with a
pricker.
Attention!
Do not damage the rear cover and cranks-
haft!
© 40656-0
z Turn in a self-tapping screw with washer.
© 42091-2
To Next Page
Loading...
