© 06/2006 8216-001
5/10
TCD 2015
Fuel system
W 07-04-01
6
z Visually inspect the components.
© 40812-0
Installing injection pump housing
z Clean contact surfaces.
z Mount new O-ring (1).
1
© 45390-1
z Oil the shank of the injection pump housing lightly.
z Press the injection pump housing into the stop in the
crankcase.
Note cylinder assignment.
The pilot pin (1) must lock in
groove (arrow).
1
© 40813-0
To Next Page
Loading...
