3
User notes
© 12/2005 8144-001
7/8
3.4.2 Structure of a job card
1. DEUTZ AG,
publisher of service documentation
2. Engine type (e.g. TCD 2013 4V)
3. Maintenance group
4. Job card number or topic
5. Title of job card
6. Reference to other job cards
7. Chapter
8. Graphic or photo
9. DEUTZ internal creation number
10.Page number
11.Date of issue of job card
12.Note
13.Danger / Important
14.Work sequence
15.Special tools; auxiliary materials
16.Conventional tools
3.5 Explanation of symbols
Triebwerk
W 02-04-01
6
16
12
4
6
1 2 3
8
10
11
5
7
5
9
13
14
15
8
Danger!
of death or to health. Must be observed!
For example: The incorrect use or con-
version of the turbocharger can lead to
serious injury.
Caution!
Danger to the component/engine. Non-
compliance can lead to destruction of the
component/engine.
Must be observed!
Note
General notes on assembly, environmen-
tal protection etc. No potential danger for
man or machine.
Tool
Conventional and special tools required
for the work.
Auxiliary materials
Working materials required in addition to
the tools for performing the work
(e.g. greases, oils, adhesives, sealants)
References
to important documents or job cards for
the work process.
For example: Job card W 04-05-05
Reference
to a document or a job card within the
work process.
Test and setting data
The necessary values are specified here.
If several values are necessary, a cross
reference is given to the Test and Setting
Values table.
For example:
ID no. P01 61 = valve clearance, inlet
Tightening specification
The necessary values are specified here.
If several values are necessary, a cross
reference is given to the Tightening Spe-
cifications table.
For example:
ID no. A01 001 = cylinder head screws
To Next Page
Loading...
