© 06/2006 8161-001
3/8
TCD 2015
Cylinder head
I 01-07-09
6
z Fit protective underlay (arrow).
z Lever valve seat insert out.
z Unclamp cylinder head.
Attention!
Do not damage cylinder head.
© 39742-1
Checking housing bore for valve seat in-
sert
Diagram for measuring the housing bore at
the points "a" and "b", in the centre of
level "1".
1
© 36640-1
z Measure housing bore with internal measuring de-
vice.
z Read off measured value.
P01 01
P01 02
P01 03
P01 04
Measuring points see diagram.
When the wear limit of the 2nd oversize
stage is reached, the cylinder head must
be renewed.
© 39743-1
To Next Page
Loading...
