TCD 2015
Drive system
W 02-09-07
© 06/2006 8171-001
2/4
6
Diagram for measuring the piston bolt bore
at the points "a" and "b" in the
levels "1" and "2".
© 37239-1
z Insert internal measuring device.
z Balance the internal measuring device at the given
measuring points and read off the measured value at
the reversal point of the pointer.
P02 78
Measuring points see diagram.
© 36484-2
Checking the piston diameter
Diagram for measuring the piston diameter
at the measuring points "1, 2 and 3", trans-
verse to the piston bolt bore.
1
2
3
© 37244-1
To Next Page
Loading...
