© 06/2006 8187-001
19/24
TCD 2015
Engine control
W 04-05-05
6
z Turn gear wheel in direction of arrow until it stops.
z Read off measured value.
P07 20
z Remove magnetic measuring stand.
z Remove dial gauge.
Repeat the measuring process on several
tooth flanks.
© 40450-0
z Install crankshaft.
W 02-04-01
z Install rocker arm brackets.
W 01-02-02
z Check and set plunger lift of injection pumps.
W 07-06-04
Do not install the turbocharger.
© 40503-0
z Tighten all screws (1).
A04 004
Concealed screws can be accessed by
turning the crankshaft with the turning gear.
1
© 40464-0
To Next Page
Loading...
