© 06/2006 8151-001
3/6
TCD 2015
Cylinder head
W 01-02-02
6
z Attach turning gear.
W 04-06-03
The pushrod must be seated with the ball
head in the ladle of the tappet.
© 40490-0
z Turn crankshaft until reaching the base circle posi-
tion of inlet and exhaust cams of the respective cylin-
der.
z Mount rocker arm bracket.
Attention!
The longer side (1) must point upwards.
The ball heads (2) must be seated in the
ladles of the pushrods .
1
2
© 45805-0
z Align rocker arm to the pushrods/valves.
z Tighten screws (1) alternately.
11
© 45806-0
To Next Page
Loading...
