RX2530 M1
Upgrade and Maintenance Manual 103
6 Power supply
Safety notes
V CAUTION!
●
Do not disassemble the power supply unit. Doing so may cause
electric shock.
●
Areas around the power supply unit may remain extremely hot after
shutdown. After shutting down the server, wait for hot components to
cool down before removing the power supply unit.
●
When installing the power supply unit, be sure to confirm that the
connector of the power supply unit is not damaged or bent.
●
Do not insert your hands in the power supply unit slot when removing
the power supply unit. Doing so may cause electric shock.
●
If the power supply unit is hard to remove, do not pull out it by force.
●
The power supply unit is heavy, so handle it carefully. If you drop it by
mistake, injuries may result.
●
For further safety information, please refer to chapter "Important
information" on page 33.
To Next Page
Loading...
