14.3 Replacing the serial interface
14.3.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 72
Ê "Suspending BitLocker functionality" on page 71
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 49
Ê "Getting access to the component" on page 49
14.3.2 Removing the defective serial interface
Ê Remove the serial interface as described in section "Removing the serial
interface" on page 294.
14.3.3 Installing the new serial interface
Ê Install the serial interface as described in section "Installing the serial
interface" on page 292.
14.3.4 Concluding steps
Ê "Reassembling" on page 54
Ê "Connecting the server to the mains" on page 60
Ê "Switching on the server" on page 61
Ê "Resuming BitLocker functionality" on page 95
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
