11.3.7 Concluding steps
Ê "Installing the CPU air guides" on page 69
Ê "Reassembling" on page 54
Ê "Connecting the server to the mains" on page 60
Ê "Updating or recovering the system board BIOS and iRMC" on page 79
Ê "Resetting the error status after replacing memory modules or processors"
on page 86
Ê "Enabling SVOM boot watchdog functionality" on page 89
Ê "Switching on the server" on page 61
Ê "Resuming BitLocker functionality" on page 95
11.4 Replacing the heat sink
11.4.1 Preliminary steps
Ê "Locating the defective server" on page 45
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 49
Ê "Getting access to the component" on page 49
Ê "Removing the CPU air guides" on page 68
11.4.2 Removing the defective heat sink
Ê Remove the heat sink as described in section "Removing the heat sink" on
page 252.
Field Replaceable Unit
(FRU)
Hardware: 15 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver
To Next Page
Loading...
Need help?
General