14.1.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 72
Ê "Suspending BitLocker functionality" on page 71
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 49
Ê "Getting access to the component" on page 49
14.1.2 Removing the slot cover
Ê Remove the corresponding riser module as described in section "Removing
a riser module" on page 62.
Ê Remove the corresponding slot cover as described in section "Removing the
slot cover (only slot 2-4)" on page 191.
14.1.3 Installing the serial interface
Figure 213: Installing the serial interface - example riser module 1
Ê Insert the serial interface.
To Next Page
Loading...
Need help?
General