10.2.3 Installing a memory module
Figure 158: Opening the securing clips
Ê Press the securing clips on both sides of the memory slot concerned
outward.
Figure 159: Installing a memory module
Ê Align the notch on the bottom of the module with the crossbar in the slot.
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
10.2.4 Concluding steps
Ê "Reassembling" on page 54
Ê "Connecting the server to the mains" on page 60
Ê "Updating or recovering the system board BIOS and iRMC" on page 79
Ê "Enabling SVOM boot watchdog functionality" on page 89
Ê "Switching on the server" on page 61
Ê "Resuming BitLocker functionality" on page 95
To Next Page
Loading...
Need help?
General