Ê Install the FBU with the holder as described in section "Installing the FBU"
on page 210 (2.5-inch HDD chassis) or section "Installing the FBU" on
page 215 (3.5-inch HDD chassis).
9.6.5.4 Concluding steps
Ê "Reassembling" on page 54
Ê "Connecting the server to the mains" on page 60
Ê "Updating RAID controller firmware" on page 82
Ê "Enabling SVOM boot watchdog functionality" on page 89
Ê "Switching on the server" on page 61
I The recalibration of the FBU starts automatically, and finishes within a
few minutes.
To Next Page
Loading...
