Ê Remove the residual thermal paste from the processor surface.
Ê Clean the processor surface using a lint-free cloth.
11.4.3 Installing the new heat sink
Ê Remove the protective cover on the underside of the heat sink.
V CAUTION!
Do not touch the thermal paste on the underside of the heat sink.
Ê Install the heat sink as described in section "Installing the heat sink" on
page 257.
11.4.4 Concluding steps
Ê "Installing the CPU air guides" on page 69
Ê "Reassembling" on page 54
Ê "Connecting the server to the mains" on page 60
Ê "Switching on the server" on page 61
To Next Page
Loading...
Need help?
General