EasyManua.ls Logo

Fujitsu PRIMERGY RX2530 M1

Fujitsu PRIMERGY RX2530 M1
372 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
318 Upgrade and Maintenance Manual
RX2530 M1
System board and components
15.4.3.2 Removing the defective TPM
Ê Remove the TPM as described in section "Removing the TPM" on page 313.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
15.4.3.3 Installing the new TPM
I The TPM spacer is already present on the system board.
Ê Install the TPM as described in section "Installing the TPM" on page 310.
15.4.3.4 Concluding steps
Ê Reinstall the system board as described in section "Installing the new
system board" on page 332
Ê "Reassembling" on page 54
Ê "Connecting the server to the mains" on page 60
Ê "Switching on the server" on page 61
Ê "Resuming BitLocker functionality" on page 95
I You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.

Table of Contents

Other manuals for Fujitsu PRIMERGY RX2530 M1

Related product manuals