15.5.3 Replacing the SATA DOM
15.5.3.1 Preliminary steps
Ê "Locating the defective server" on page 45
Ê "Shutting down the server" on page 48
Ê "Disconnecting the server from the mains" on page 49
Ê "Getting access to the component" on page 49
15.5.3.2 Replacing the SATA DOM
Ê Remove the defective SATA DOM as described in section "Removing the
SATA DOM" on page 321.
Ê Install the new SATA DOM as described in section "Installing the SATA
DOM" on page 319.
15.5.3.3 Concluding steps
Ê "Reassembling" on page 54
Ê "Connecting the server to the mains" on page 60
Ê "Switching on the server" on page 61
Ê "Verifying system information backup / restore" on page 81
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
