RX2530 M1
Upgrade and Maintenance Manual 239
11 Processors
Safety notes
V CAUTION!
●
Do not install unsupported processors. For further information on
supported processors, refer to section "Supported processors" on
page 241.
●
Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
●
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
●
When removing or installing the processor, be careful not to touch or
bend the spring contacts on the processor socket.
●
Never touch the underside of the processor. Even minor soiling such
as grease from the skin can impair the processor’s operation or
destroy the processor.
●
For further safety information, please refer to chapter "Important
information" on page 33.
To Next Page
Loading...
Need help?
General