Ê "Verifying the system time settings" on page 91
Ê "Looking up changed MAC / WWN addresses" on page 96
Ê "Updating the NIC configuration file in a Linux environment" on page 93
Ê "Enabling SVOM boot watchdog functionality" on page 89
Ê "Switching on the server" on page 61
Ê "Resuming BitLocker functionality" on page 95
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I Configuration of network settings should be performed by the
customer. For further information, please refer to section "Note on
network settings recovery" on page 329.
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing the system board" on page 99
To Next Page
Loading...
