GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
3 - 30 Section 3-7 - . Configuration
3-7-1-4 Language Selection
Figure 3-20 Language Selection
Table 3-13 Language Adjustments
STEP TASK EXPECTED RESULT(S)
1.
Open the Configuration Window, see 4-2-4 "Log On to the
System as ‘ADM’" on page 4-12.
Select System, if needed.
The System Settings window is displayed.
2.
Use the Language drop down dialog, see Figure 3-20, to select
your preferred language for the on-screen interface.
The following languages are available;
- ENG - English
- NOR - Norwegian
- DEU - German
- ITA - Italian
- FRA - French
- ESP - Spanish
- RUS - Russian
- GRE - Greek
- DAN - Danish
- SWE - Swedish
The selected language will be used as soon as the unit has been
restarted.
LANGUAGE
To Next Page
Loading...
