GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5 - 89
5-4-6-2 BEP3.x Description
NOTE: Specifications mentioned about the Back-End Processor (BEP3.x) are minimum requirements.
The actual hardware could exceed these specifications as technology advances.
5-4-6-2-1 The EMC Enclosure House
• A Power Supply (no UPS battery backup)
• An Intel Motherboard with 1 Gbytes of RAM and a single 3.2 GHz P4 processor.
• Six (6x) USB Ports.
- 2x are located on the front of the BEP3
- 4x are located at the rear of the BEP3
• One (1x) Serial Port
• AGP Analog Video output from the motherboard
• AGP Card (MOLEX) with DVI output (without 4D)
or
AGP Card (ATI) with DVI output (4D) in AGP slot
• Video Frame Grabber Card
• LAN output from the motherboard (10/100 Base T)
• Patient I/O:
- BEP3.0 supports the original serial databus (not USB)
- BEP3.2 Supports USB 1.1
5-4-6-2-2 Use of Expansion Slots on Motherboard
Table 5-61 Expansion Slots Usage BEP 3.x
SLOT # FUNCTION INTERFACE NOTES
AGP
ADD VIDEO CARD WITH DVI
OUTPUT
AGP
DIFFERENT TYPES USED FOR
UNITS WITHOUT AND WITH 4D
1 UNUSED
PCI
2 SCSI CARD
PCI
3 PRAME GRABBER
PCI
4 UNUSED
PCI
5 PC2IPIIB
PCI
6 UNUSED
PCI
To Next Page
Loading...
