GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
1 - 8 Section 1-2 - Service Manual Overview
1-2-4-2 History - Hardware/Software Versions
The contents in this sub-section has been moved to chapter 9.
• For Front-End Processor Version 2, please refer to: 9-18-2 "Hardware/Software Versions, Front-
End Processor Version 2 (FEP2)" on page 9-38
• For Front-End Processor Version 1, please refer to: 9-18-4 "Hardware/Software Versions, Front-
End Processor Version 1" on page 9-42
1-2-4-3 History - Peripherals/Software Versions
The contents in this sub-section has been moved to chapter 9.
Please refer to:
• 9-22-1 "Peripherals Compatibility" on page 9-63
1-2-4-4 FRUs for Back-End Processor
The contents in this sub-section has been moved to chapter 9.
Please refer to:
• Section 9-19 "Back-End Processor" on page 9-46
1-2-4-5 History - Supported Probes
The contents in this sub-section has been moved to chapter 9.
Please refer to:
• Section 9-26 "Probes" on page 9-80
1-2-4-6 How to Turn the Scanner ON and OFF
Please refer to Chapter 4, section 4-2-2 - Power ON/ Boot UP, for a detailed description of how to turn
the scanner ON and to Chapter 4, section 4-2-3 - Power Shut Down for a detailed description of how to
turn the scanner OFF.
1-2-4-7 How to Check for Hardware/Software Version, Installed Options
To verify the hardware versions on the boards, please refer to the appropriate table:
• "Hardware/Software Versions, Front-End Processor Version 2 (FEP2)" on page 9-38
• "Hardware/Software Versions, Front-End Processor Version 1" on page 9-42
Please refer to "Software Configuration Checks" on page 4-82 to check the software versions on local
software on the boards.
Please refer to "Functional Checks" on page 4-28 to check for installed options.
1-2-4-8 Purpose of Operator Manual(s)
The Operator Manual(s) should be fully read and understood before operating the Vivid 7 and also kept
near the unit for quick reference.
To Next Page
Loading...
