GE Vivid 7 - Page 742

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
9 - 46 Section 9-19 - Back-End Processor
Section 9-19
Back-End Processor
9-19-1 Overview
Several different Back-End Processors (BEPs) have been included in the Vivid 7 scanners and used as
service parts, see table below.
Table 9-34 BEP overview
BEP MODEL DESCRIPTION
LATEST SOFTWARE
(LIST UPDATED
08.OCT.2007)
LINK
RFT SYSTEMS
BEP (BEP1)
FIRST BEP VERSION, INTRODUCED 2001 (RFT)
V2.5.0,
V3.5.0/V3.5.1,
V3.6.0/V3.6.2
PAGE 9-60
BEP2
REPLACEMENT FOR BEP1, INTRODUCED 2002 (RFT) PAGE 9-59
BEP4 as replacement for BEP1 & BEP2
INTRODUCED 2007 (RFT) PAGE 9-53
RFI SYSTEMS
BEP2.2
WAS RELEASED FOR USE WITH RFI 2003
V3.4.2
PAGE 9-58
BEP4 as replacement for BEP2.2
INTRODUCED 2007 PAGE 9-51
BEP3
INTRODUCED 2004 V4.2.0, V5.2.0, V6.1.0 PAGE 9-57
BEP3.2
INTRODUCED 2005 V5.2.0, V6.2.0 PAGE 9-57
BEP4.2 as replacement for BEP3.x
INTRODUCED FOR NEW PRODUCTS 2006
INTRODUCED AS REPLACEMENT FOR BEP3.x 2007
V4.2.0, V5.2.0, V6.1.3 PAGE 9-49
BEP4.3. Introduced for BT’08 systems
INTRODUCED FOR NEW PRODUCTS OCTOBER 2007 V7.0.0 PAGE 9-47