GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 6 - Service Adjustments 6 - 1
Chapter 6
Service Adjustments
Section 6-1
Overview
6-1-1 Purpose of this Chapter
This section describes how to adjust the scanner.
6-1-2 Contents in this Chapter
Section 6-2
Date and Time Adjustments
Please refer to: 3-7-1-3 "Date and Time Adjustments" on page 3-29.
Section 6-3
Daylight Saving Time (DST) Adjustments
From the factory, the automatic DST function has been disabled.
Manually adjust the DST at the start and at the end of the DST period (if needed).
Section 6-4
Power Supply Adjustments
It is not possible to adjust the power supplies on this unit.
Table 6-1 Contents in Chapter 6
SECTION DESCRIPTION
PAGE
NUMBER
6-1 Overview 6-1
6-2 Date and Time Adjustments 6-1
6-3 Daylight Saving Time (DST) Adjustments 6-1
6-4 Power Supply Adjustments 6-1
6-5 LCD Monitor Adjustments 6-2
6-6 CRT Monitor Adjustments 6-3
6-7 Front-End Alignment Procedure (Beamformer Calibration) 6-6
6-8 Direction Lock and Brake Adjustment 6-9
To Next Page
Loading...
