GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8 - 49
8-8-11-2 Vivid 7 System SW Loading - Software Version v3.x (cont’d)
7.) The Software loader program starts and the below Time Bar Info Screen appears.
8.) Wait for the SW Installation to be completed. (Typical installation time: 5 minutes). Status bar on the
screen indicates process.
9.) You will now be prompted to remove the first CD and restart the unit when the SW Installation is
completed. Remove the CD, but don’t restart the System this time
. The next step is to load the
application software.
Figure 8-44 Software Loading Underway
(Picture distorted here due to photo technical limitations, it should look OK on screen)
WARNINGWARNING
Do not interrupt the SW loading at any time.
To Next Page
Loading...
