GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8 - 59
8-9-8 Prepare MO Disk for Patient Archive - Software Version v2.x
NOTE: A separate MO disk is required for backup of Patient Database, System Configuration and User
Defined Configurations (customer presets).
This MO disk must be a separate disk with no images stored.
1.) Label the MO Disk “Backup”.
2.) If the MO Disks is already formatted and labelled, move to section 8-9-9 on page 8-60
3.) Insert a MO disk, side A, into the empty MO drive.
4.) Press CONFIG
(F2) and log on as adm, see 4-2-4 "Log On to the System as ‘ADM’" on page 4-12.
5.) Select Connectivity in the Image and Analysis menu.
6.) Select Tools in the Connectivity menu.
7.) In the Label window, type the same name as labelled on the MO disk side A.
8.) Select Format.
9.) A warning “Are you sure you want to format H: and remove all data from the media” appears, select
OK.
10.)Wait until the information dialogue window appears on screen.
11.)Select OK to continue.
Figure 8-53 Prepare MO Disk - Patient Archive
To Next Page
Loading...
