GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
8 - 64 Section 8-9 - Software Loading Procedure - Software Version v2.x
8-9-12 Record Default Dataflow - Software Version v2.x
1.) In the Connectivity window, select Dataflow.
2.) Verify that Default Dataflow is selected.
3.) Record Default Dataflow Name in table Table 8-17 on page 8-64.
Figure 8-58 Select Dataflow
Table 8-17 Record Default Dataflow Name
DEFAULT DATAFLOW NAME
To Next Page
Loading...
