GE Vivid 7 - Page 658

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
8 - 70 Section 8-9 - Software Loading Procedure - Software Version v2.x
8-9-14 Software Loading - Software Version v2.x
8-9-14-1 Overview
This software loading procedure covers:
• Installation of BT’02 Software (application software version v2.x) on Vivid 7 units.
Refer to Table 8-20 on page 8-69 where you recorded the unit’s software versions.
The software for Vivid 7 is divided on two CDs, one CD with the System Software and one with the
Application Software.
Table 8-21 Vivid 7 Models Versus Minimum Software Requirement
GE VINGMED
PART NUMBER
DESCRIPTION
APPLICATION SOFTWARE
VERSION
FB000030 VIVID 7 (BT’01) V2.3.1 (or higher)
FC000060 VIVID 7 (BT’01) V2.3.1 (or higher)
FC000180 VIVID 7 PRO (BT’02) V2.3.1 (or higher)
FC000190 VIVID 7 PRO (BT’02) V2.3.1 (or higher)
FC000200 VIVID 7 (BT’02) V2.3.1 (or higher)
FC000210 VIVID 7 (BT’02) V2.3.1 (or higher)