Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
1.4 Document Conventions
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 18 of 513
1.4.2 Superscript notation for parameters and values
Table 1.1: Symbols used to mark the type of parameters
Table 1.2: Symbols used to indicate storage options or correlations with other commands
Table 1.3: Symbols used to mark different types of default values of parameters
Parameter type Meaning
<param>
(num)
Parameter value must be numeric type.
<param>
(str)
Parameter value must be string type.
<param>
(text)
Parameter value is a string according to selected character set. Not enclosed in
double quotes
<param>
(u)
Unspecified, i.e. parameter value may be numeric or string type.
Parameter option Meaning
<param>
(+CSCS)
Parameter value has to be (is) coded according to current setting of <chset> (see
AT+CSCS for details)
<param>
(&W)
Parameter value is stored to user profile in non-volatile memory after executing
AT&W
<param>
(NV)
Parameter is stored in non-volatile memory.
Value option Meaning
[x] Default value set if parameter is omitted.
x
(&F)
Factory value restored by AT&F
x
(P)
Powerup value of a parameter not stored in non-volatile memory.
x
(D)
Delivery value of a parameter which may be overridden from non-volatile setting
(refer to symbol
(NV)
and symbol
(&W)
above).

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English