Cinterion
®
EHS6 AT Command Set
9.8 AT+CLIP
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 211 of 513
9.8 AT+CLIP Calling Line Identification Presentation
AT+CLIP refers to the supplementary service CLIP (Calling Line Identification Presentation) that enables a
called subscriber to get the calling line identity (CLI) of the calling party when receiving a mobile terminated call.
The AT+CLIP write command enables or disables the presentation of the CLI at the TE. It has no effect on the
execution of the supplementary service CLIP in the network.
The AT+CLIP read command gives the status of <n>, and also triggers an interrogation of the provision status
of the CLIP service according to 3GPP TS 22.081 [29] (given in <m>). If no SIM card is available or the SIM-PIN
is not entered, the command response is "ERROR".
Syntax
Unsolicited Result Code
+CLIP: <number>, <type>[, , [, [<alpha>][, <CLI validity>]]]
Parameter Description
[0]
(&F)
Suppress unsolicited result codes
1 Display unsolicited result codes
0 CLIP not provisioned
1 CLIP provisioned
2 Unknown
Test Command
AT+CLIP=?
Response(s)
+CLIP: (list of supported<n>s)
OK
Read Command
AT+CLIP?
Response(s)
+CLIP: <n>, <m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CLIP=<n>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN Last Reference(s)
± - - 3GPP TS 27.007 [45],
3GPP TS 22.081 [29]
<n>
(num)(&V)(&W)
<m>
(num)(&V)
To Next Page
Loading...
Need help?
General
