Cinterion
®
EHS6 AT Command Set
7.6 ATDL
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 141 of 513
7.6 ATDL Redial last number used
ATDL redials the last voice and data call number used in the ATD command. If terminated with semicolon ";"
ATDL dials the last voice call number stored in the "LD" phonebook. Otherwise, ATDL dials the last data call num-
ber (not contained in the "LD" phonebook).
Syntax
Exec Command
ATDL[;]
Response(s)
If successfully connected and non-voice call (ME switches to online data mode):
CONNECT <text>
If voice call and command input is completed:
OK
If no dialtone (parameter setting ATX3 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
NO ANSWER
ERROR
+CME ERROR: <err>
PIN Last Reference(s)
+ - - ITU-T V.250 [16]
To Next Page
Loading...
