Gemalto Cinterion EHS6 - 12.20 AT^SMGR Read short message without setting status to REC READ

Cinterion
®
EHS6 AT Command Set 
12.20 AT^SMGR
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 351 of 513
12.20 AT^SMGR Read short message without setting status to REC
READ
The AT^SMGR command is a proprietary command which has the same syntax as AT+CMGR. The only functional
difference is that the status "REC UNREAD" of a short message is not overwritten to "REC READ". 
Syntax

Note
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
Test Command
AT^SMGR=?
Response(s)
OK
Write Command
AT^SMGR=<index>
Response(s)
see AT+CMGR
PIN  Last
+ + -