Cinterion
®
EHS6 AT Command Set
7.3 ATD><mem><n>
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 137 of 513
7.3 ATD><mem><n> Mobile originated call using specific memory
and index number
ATD><mem><n> can be used to set up an outgoing call to the specified number. The termination character ";"
shall be added when a voice call is originated.
Syntax
Parameter Description
Phonebook storage:
For detailed description of storages see AT+CPBS.
FD Fixed Dialing phonebook
SM SIM phonebook
LD Last number Dialed phonebook
Integer type memory location in the range of locations available in the selected memory, i.e. the index number
returned by AT+CPBR.
String of GSM modifiers:
I Activates CLIR (disables presentation of own phone number to called party, if no *#31#-code is within the
dial string)
i Deactivates CLIR (enables presentation of own phone number to called party, if no *#31#-code is within the
dial string)
Examples
EXAMPLE 1
To query the location number of the phonebook entry:
Exec Command
ATD><mem><n>[<mgsm>][;]
Response(s)
If successfully connected and non-voice call (ME switches to online data mode):
CONNECT <text>
If voice call and command input completed:
OK
If no dialtone (parameter setting ATX3 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
NO ANSWER
ERROR
+CME ERROR: <err>
PIN Last Reference(s)
+ - - ITU-T V.250 [16]
<mem>
(text)
<n>
(num)
<mgsm>
(str)
To Next Page
Loading...
Need help?
General
